Eavestaff soft pedal
General discussion about piano makes, problems with pianos, or just seeking advice.
Moderators: Feg, Gill the Piano, Melodytune
-
- New Member
- Posts: 2
- Joined: 28 May 2013, 19:58
Eavestaff soft pedal
Post by Palefire1969 »
Hello all. I was defeated the other day by the una corda pedal on an old Eavestaff grand piano. It's not doing anything, and it looks like someone has had a go at fixing it, but I can't work out what's supposed to go where. Any advice, diagrams, etc would be very welcome!
- Colin Nicholson
- Executive Poster
- Posts: 1704
- Joined: 04 Jul 2010, 19:15
- Location: Morpeth, Northumberland
- Contact:
Re: Eavestaff soft pedal
Post by Colin Nicholson »
I think it would be best [and easier] if you contacted a piano tuner to look at it.
Grand Pedal mechanisms/traps/ rockers/ lift rods/ crank levers/ lyre rods & stays/ springs etc vary alot from piano to piano - and there is no such thing as providing a "User Guide Diagram Book" for this. Technicians sometimes devise their own drawings perhaps during a restoration, for installation later. However, an Eavestaff pedal mechanism doesn't spring to mind.
The whole mechanism [hammers/levers] & keyboard may need to be removed first to get a better view of the internal crank lever that lies partly bedded beneath the key bed. If the crank is not working or sliding the mech & keys to the right, then there may be problem with the lyre lift rod on the pedal lyre/ poorly adjusted.... or something may have jammed between the keybed & keyframe.
I would get a pro to look at it.
TIP: If you think a professional is expensive, just wait until a novice has had a go at it!!....
costs can vary depending on levels of 'bodge jobs' done - so I would go straight to the phone book - to save you money in the long run.
Might be something simple - but its best to get it checked out.
Grand Pedal mechanisms/traps/ rockers/ lift rods/ crank levers/ lyre rods & stays/ springs etc vary alot from piano to piano - and there is no such thing as providing a "User Guide Diagram Book" for this. Technicians sometimes devise their own drawings perhaps during a restoration, for installation later. However, an Eavestaff pedal mechanism doesn't spring to mind.
The whole mechanism [hammers/levers] & keyboard may need to be removed first to get a better view of the internal crank lever that lies partly bedded beneath the key bed. If the crank is not working or sliding the mech & keys to the right, then there may be problem with the lyre lift rod on the pedal lyre/ poorly adjusted.... or something may have jammed between the keybed & keyframe.
I would get a pro to look at it.
TIP: If you think a professional is expensive, just wait until a novice has had a go at it!!....
costs can vary depending on levels of 'bodge jobs' done - so I would go straight to the phone book - to save you money in the long run.
Might be something simple - but its best to get it checked out.
AA Piano Tuners UK
Colin Nicholson Dip. Mus. CMIT CLCM PTLLS
Piano tuning & repairs. Full UK restoration service
http://www.aatuners.com
Tuition ~ Accompaniment ~ Weddings
http://www.pianotime1964.com
Member of The Guild of Master Craftsmen
Colin Nicholson Dip. Mus. CMIT CLCM PTLLS
Piano tuning & repairs. Full UK restoration service
http://www.aatuners.com
Tuition ~ Accompaniment ~ Weddings
http://www.pianotime1964.com
Member of The Guild of Master Craftsmen
- Johnkie
- Persistent Poster
- Posts: 189
- Joined: 14 Jan 2011, 16:15
- Location: Newcastle upon Tyne
- Contact:
Re: Eavestaff soft pedal
A few photos may give us a better idea of what may be going on. I seem to recall that on some eavestaff grands the soft pedal didn't slide the action .... it merely raised the hammers acting more like an upright half-blow.
Concert Tuner & Technician for 45+ years - North East UK
-
- New Member
- Posts: 2
- Joined: 28 May 2013, 19:58
Re: Eavestaff soft pedal
Post by Palefire1969 »
Thanks both! I'm having another look at it on Saturday, so I might take a few pretty pictures. It never occurred to me that it might work like an upright soft pedal. Cheers!
- Colin Nicholson
- Executive Poster
- Posts: 1704
- Joined: 04 Jul 2010, 19:15
- Location: Morpeth, Northumberland
- Contact:
Re: Eavestaff soft pedal
Post by Colin Nicholson »
When you said "on an old Eavestaff....." is it your piano? .... or have you just recently had it delivered? .... it just sounds as though you haven't had the piano long or may not own it. If just recently delivered, it is quite common for parts to go missing when the lyre is removed. Did the pedal work fine before, and now its stopped working? .... sometimes 'logistics' is the answer!
Problem is that often we only hear half a story. Pictures might help, but depends on how they are taken, and IF the offending part [missing?] is shown clearly - which you may not be aware of.... so perhaps get a tuner to look at it if its not obvious.
Problem is that often we only hear half a story. Pictures might help, but depends on how they are taken, and IF the offending part [missing?] is shown clearly - which you may not be aware of.... so perhaps get a tuner to look at it if its not obvious.
AA Piano Tuners UK
Colin Nicholson Dip. Mus. CMIT CLCM PTLLS
Piano tuning & repairs. Full UK restoration service
http://www.aatuners.com
Tuition ~ Accompaniment ~ Weddings
http://www.pianotime1964.com
Member of The Guild of Master Craftsmen
Colin Nicholson Dip. Mus. CMIT CLCM PTLLS
Piano tuning & repairs. Full UK restoration service
http://www.aatuners.com
Tuition ~ Accompaniment ~ Weddings
http://www.pianotime1964.com
Member of The Guild of Master Craftsmen
Post Reply
5 posts
• Page 1 of 1
- Main Site Menu
-
Home
Piano Tuners
Piano Makers
Piano Teachers
Piano Accompanists
Piano Entertainers
Piano Shops
Piano Removals
French Polishers
Piano Rehearsal Rooms
Piano Hire
Pianos For Sale
Piano Parts
Piano History
Piano Forum
Piano Music
Piano Events
Advertise
Advanced Search Contact Site Admin
Help with a listing
Sitemap
Main Terms And Conditions
-
- Recent Listings