Ascherberg piano
Moderators: Feg, Gill the Piano, Bill Kibby
-
- Regular Poster
- Posts: 48
- Joined: 22 Apr 2004, 19:46
- Location: Manchester, UK
Ascherberg piano
Post by Steve071261 »
anybody heard of a piano manufacturer called Ascherberg or Ascherburg? I've not come across the name myself and a quick search of the lists on this site haven't turned it up, although I may be looking in the wrong place
thanks
Steve
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
-
- New Member
- Posts: 3
- Joined: 24 Sep 2004, 01:33
- Location: Australia
emil ascherberg piano #1196 pre 1885
Post by Mark_Aussie »
Any help appreciated...Thanks...... Mark
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
http://www.uk-piano.org/piano-gen/valua ... ianos.html
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
-
- New Member
- Posts: 3
- Joined: 11 Oct 2004, 18:44
Piano HIstory
Post by fleetcanuck »
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
I found an Ascherberg upright piano which had the strangest of piano-actions in that the whole of the hammer and action was permanetly attached to the key frame and the only way to remove the action was to slide the whole keyboard keyframe with action bolted to it just in the same way as a Grand Piano would have its action removed. It made working on it rather cumbersome having to place the whole monster action keyboard hulk on a bench. But I fiddled about with it for over an hour before I found out why the action wouldn't separate from the keys.
Not a bad piano. The Grands are quite nice.
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
-
- New Member
- Posts: 3
- Joined: 11 Oct 2004, 18:44
Post by fleetcanuck »
Our piano, I have found, is 124 years old today, having been sold to the previous owner's uncle on 25 November, 1880, in Stoke-On-Trent.
The action is made by Morgenstern & Kotrade of Leipzig.
I have been trying to clean it up a bit. On this one the action comes out as a unit and leaves the keys in place. Once it is cleaned up we will see how it sounds. I did notice that some of the felt on the hammers has moth damage, so I imagine that it will need some work.
The action seems to be quite solid, though I do see that one small piece has a crack in it.
If I can not find someone in our area who is keen to work on this project, I look forward to puttering away at the project when I have some spare time.
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
Can you find any numbers inside the top, so that we can use them as a guide to the date of others?
What is your area? Stoke?
Read on for contact details...
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
-
- New Member
- Posts: 3
- Joined: 11 Oct 2004, 18:44
Post by fleetcanuck »
The number on the sound board is 2968. This number is actually stamped into the wood. That number is also found on many of the case components, however, on the frame at the back it is 2969!
We do not have a scanner, so I cannot send you the image.
I hope that I did not sound presumptuous saying that I may do some of the restoration myself. I realize that piano tuners and technicians are highly trained and skilled people and that much of what they do is somewhat of a fine art. I would not attempt a lot of things in my free time, however, we have been told by three experts that they are unwilling to do the work on this piano because they do not feel it is worthwhile to work on the birdcage pianos. The organist from our church, a highly respected musician (and instrument builder), thinks these fine old pianos are worth preserving and have a unique sound, much like other old instruments and that they should be preserved. With his encouragement I am doing as much clean up as possible and then we will see what it needs. We are not in a hurry, and will try to do only what is reasonable.
I am not in England, rather in the middle of Canada, in Winnipeg.
When I trained at college in London 1977 I was told by a customer that previous tuners had refused to tune or do any work on her overdamper - in fact one recruited professional tuner had walked into the room, taken one look at the piano and said, "I'm not tuning that" and turned around and walked out!
She was delighted that I was prepared to tackle it and then when I began my career in the county of Devon I encountered more birdcage pianos per square mile than almost anywhere in the country. They were in farms; churches; church halls; schools yes modern schools!; pubs; clubs and private homes. The county was infested with them. I soon realized that if I refused to work on them I would probably have next to no income so I had to do what I could with them. Some of them exceptionally were quite nice though. I remember a Bluthner from about 1895 which was a lovely piano and the dampers actually worked well.
It was only when coming to the point of needing to replace those frightful dampers in some of the most appallingly made overdampers, that I found my skills were just not as good as the original factory who probably had precision jigs to cut the felt. I would be on a hiding to nowhere. I'd very likely make the damping worse. So I left that alone and advised the client didn't spend any money on my frustrated attempts to "improve" it. They usually upgraded to a better piano but not always.
However I will wind up this long tome by saying I think you have no choice living where you do (given the unpopularity of the work) than to have a good go at it yourself. Good luck I say.
I might finally tell you something that may make some technicians cringe! I sawed off the top note of the keyframe on an Overdamper in my neighbourhood back in the 1980's in order to "Transpose" the keyboard moving it up one semitone. Each key was then playing the next hammer up, in the series. Why? you may ask, did I do that? The strings were too rusty to bring up to concert pitch. Most of them would break on tuning them a quarter of the way up from 415 to 440hz. The family had just lost their father (headmaster of a school died of a heart attack). The 2 daughters both played flute. The mother wanted to accompany them on a piano which had just been donated to them. They were very short of money with the one part-time income left in the household.
So in desperation I solved their problem. The whole family was "over the moon" about it when they could sit there and play middle C and it out came a true concert pitch C.
The piano wasn't worth 20 pounds as it stood, it was just junk so in just half an hour I'd got it playing at A440 and it wasn't noticable or a problem that the keyboard was then 1.5cm further to the right; the top note ended on a black G#. There was a gap at the bass end of 1.5cm but it worked. You couldn't do that with an overstrung under-damper!
Plado
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
http://www.uk-piano.org/piano-gen/reports.html
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Ascherberg
Post by Bill Kibby »
http://www.uk-piano.org/piano-gen/datem ... ianos.html
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
-
- New Member
- Posts: 3
- Joined: 24 Sep 2004, 01:33
- Location: Australia
Ascherberg
Post by Mark_Aussie »
-
- New Member
- Posts: 3
- Joined: 24 Sep 2004, 01:33
- Location: Australia
Company Information - Emil Ascherburg
Post by Mark_Aussie »
Ascherberg
http://www.lunds.com/Auctions/AntiqueAn ... 964343183/
Re: Ascherberg piano
I'm Andrea From Israel.
I have an Ascherberg #5069 which belongs to my Family for 3 generations.
My Grandfather bought it in Mid 50's at Buenos-Aires, Argentina.
I got it as a present for my 12th birthday and when my family imegrated to Israel in 1989 we had it brought by boat.
Can any one tell me more about the history of this specific piano serie or my specific piano ?
Many Thanks in Advance.
Here is a recent picture of this magnificent instrument:
- Bill Kibby
- Moderator
- Posts: 5687
- Joined: 04 Jun 2003, 19:25
- Location: Lincolnshire UK
- Contact:
Re: Ascherberg piano
Post by Bill Kibby »
http://www.uk-piano.org/piano-gen/archives.html
http://pianohistory.info
Email via my website.
If you find old references or links on this site to pianogen.org, they should refer to pianohistory.info
- Main Site Menu
-
Home
Piano Tuners
Piano Makers
Piano Teachers
Piano Accompanists
Piano Entertainers
Piano Shops
Piano Removals
French Polishers
Piano Rehearsal Rooms
Piano Hire
Pianos For Sale
Piano Parts
Piano History
Piano Forum
Piano Music
Piano Events
Advertise
Advanced Search Contact Site Admin
Help with a listing
Sitemap
Main Terms And Conditions
-
- Recent Listings